Single Axis Accelerometers

KAH Single axis Hub Accelerometers

Single Axis Accelerometers

KA Sensors design, manufacture and calibrate a wide range of Accelerometers. 

 

Providing products with a Single Axis of measurement in very small, rugged and lightweight packages. 

 

KAA 1 and 2 Axis Accelerometers
KAA 1 and 2 Axis Accelerometers

The KAA Series of accelerometers offer a compact and robust solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems.  Supply can be either 5V or 8-16V and also specified as with a single or dual axis accelerometer.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g Range
  • Ruggedized Construction
  • 1 or 2 axis
  • DC Response
  • Built-in Amplifier
  • Band Width 0-1500Hz
KAE single / 1 Axis Accelerometer

The KAE Series of miniature accelerometers offer a compact and rugged solution for the motor sports and automotive testing industries.  The sensors offer 1 axis of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g
  • Single Axis
  • DC Response
  • Rugged Design
  • Built-in Amplifier
KAH Hub Accelerometer
KAH Hub Accelerometer

The KAH Series of accelerometers offer a compact and rugged solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g Range
  • Ruggedized Construction
  • 1 Axis of Measurement
  • DC Response
  • Built-in Amplifier
KATD 1 and 2 Axis (Dual) Low Bandwidth Accelerometer
KATD 1 and 2 Axis (Dual) Low Bandwidth Accelerometer

The KATD Series of single or dual axis accelerometers are designed for true inertial measurements on race vehicles or automotive test vehicles. The use of low bandwidth sensing elements ensures that high frequency vibration from transmission components or similar do not affect the measurements. Therefore allowing only lower frequency components to be detected and measured. The sensors offer 2 axes of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Aero Performance - Launch Control - Track Mapping - Lean Angle – Cornering – Braking

  • Miniature Size
  • ±2g to ±10g
  • 2 Axis Output
  • 0 to 20Hz Bandwidth
  • ±20,000g Over Range
  • Built-in Amplifier 
KG Series of angular rate sensors - Gyros
KG Series of angular rate sensors - Gyros

The KG Series of angular rate sensor offers a compact and rugged solution for the motor sports and automotive testing industries.  The sensors offer 1, 2 or 3 axis of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V which is ideal for most data acquisition systems. Supply voltage can be 5V or 8-16V and low current consumption of less than 25mA.  With a bandwidth of zero to 1500Hz these sensors are useful for applications within component and full vehicle testing and development programs.

Typical applications include: Aero Performance - Structural Analysis - Suspension Test - Launch  - Control – Braking

  • Miniature Size
  • ±80° /S or ±200/S
  • <±1.0% FS Linearity
  • 1, 2 or 3 Axis
  • DC Response
  • Built-in Amplifier