Gearshift / Flatshift

GST Gear Lever Load Cell for flatshifting

Load cells designed for use in cluchless/clutch -free full throttle gearshift installations also referred to a flat shifting.  A step above some gear knobs with switches inside, the KA Sensors GSS & GST products are highly reliable, rugged and can be specified in a wide range of sensitivities.  The GSS (Gear Shift Load Cell), is a device that is fitted in-line with a gear linkage and it produces an output dependant on whether it’s under compression or tension, thus allowing an ECU to know if on a sequential gearbox a higher or lower gear is being selected and allowing a torque reduction strategy to be instigated..  The GST (Gear Lever Load Cell) is a replacement for a traditional gear knob and like the GSS provides a similar output whether the knob is being pulled or pushed.

GSS In-Line Gearshift / Flatshift Load Cell / Sensor
GSS In-Line Gearshift / Flatshift Load Cell / Sensor

The GSS series of miniature load cells are fitted into the gearbox control rod and designed for use in clutchless gearshift applications. During the gearchange sequence the driver moves the gear lever as normal, the GSS series load cell detects the force applied to the gear shift lever, this force is measured by the ECU, then a series of control events take place that allows the gears to mesh with full throttle still applied.

Typical application include: Gearshift - Suspension - Steering - Pedal Force - General Testing

  • Miniature Size
  • ±500N or ±1000N Range
  • Ruggedised Construction
  • 5V or 8-16V Supply
  • M6 or M8 threads Standard
  • ±1% Accuracy
GST Gear Lever Load Cell /Sensor
GST Gear Lever Load Cell /Sensor

The GST Series Gear Lever Load Cells are designed for the detection and measurement of tension/compression forces in gear shift applications. Installed directly on top of the gear lever, the load cell is fitted with an aluminium or nylon knob. Detection of the direct driver input force is made when selecting gears. The load cell has a pre amplified signal which is compatible with most ECUs, therefore ensuring a simple and reliable clutchless gear change strategy to be performed.

Typical applications include: Gear Shift - General Testing

  • For Sequential or ‘H’ Pattern Gearbox
  • ±250N, ±500N or ±1000N Range
  • Rugged Construction
  • 5V or 8-16V Supply
  • Built-in Amplifier
  • ±0.5% Accuracy