AS High Accuracy Pressure Transducer

The AS Series of High Performance Pressure Transducers have been designed for the detection of fluid and air pressures in the most demanding motorsport and automotive applications; ideal for high precision data acquisition or control systems.

The modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations.

Typical Applications Include: Air - Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • ±0.25% High Accuracy 
  • 1 to 400 Bar Range
  • Rugged Construction 
  • Amplified Output 
ASH High Endurance Pressure Transducer

The ASH Series of High Performance Pressure Transducers have been designed for extreme endurance and high temperature installations on motorsport and automotive applications; ideal for high precision data acquisition or control systems. The transducers can be installed directly onto vehicles or as part of a test stand or dyno.

The transducers offer a high level of reliability and endurance, they are protected against the high vibration, shock and high temperatures found in motorsport. Continuous operation up to 150°C allows for installation in hot zones.

Typical Applications Include: Air - Brakes - Boost - Coolant - Fuel - Oil - Water 

 

Features:

  • High Fatigue Life
  • High Accuracy
  • 20 to 400 Bar Range
  • Rugged Construction
  • Amplified Output
  • ±0.2% Accuracy

 

ASHT High Performance Pressure & Temperature Transducer

The ASHT Series feature both Pressure and Temperature Sensors within a single transducer package. Designed for use within demanding motorsport and automotive testing industries, the ASHT is ideal for high precision data acquision or control systems. 

By offering a compact size, all stainless steel construction and with installation in hot zones up to 150°C, these sensors are protected against the high vibration, shock and high temperatures found in motorsport applications.

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • Built-In Temperature Sensor
  • Rugged Construction
  • 5 to 200 Bar Range
  • 150°C Operation
  • Amplified Output
  • ±0.2% Accuracy
ASL Standard Pressure Transducer

The ASL Series of Standard Pressure Transducers have been designed for the detection of fluid and air pressures in demanding motorsport and automotive applications; ideal for high precision data acquisition or control systems.

Designed to offer a professional level of performance at a cost effective price level for all levels of motorsport, these transducers can be installed directly onto vehicles or as part of a test stand or dyno.

Typical Applications Include: Air - Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • Compact Design
  • 1 to 400 Bar Range
  • Rugged Design
  • Amplified Output
  • ±0.5% Standard Accuracy
ASLA Lightweight Pressure Transducer

The ASLA Series of Lightweight Pressure Transducers are constructed from aluminium and offer the same high performance of measurement found in our ASL Standard Series yet half the weight. Ideal for installation on carbon air box where the mass needs to be kept low or any application where every gram saved is vital. Standard pressure ranges are based around the requirements of air applications found on race cars such as MAP, Barometric, Boost. Pressure connections are M10 x 1 or dash 3.

Typical applications include: Aerodynamics - Airbox - Barometric - Boost - Fuel - Oil 

Features: 

  • Lightweight 
  • 1 to 10 Bar
  • Compact Design
  • Rugged Construction
  • Amplified Output
  • ±0.5% Accuracy
ASLAB Lightweight Barbed Pressure Transducer

The ASLAB Lightweight Barbed Pressure Transducer has been designed for the detection of fluid and air pressures in demanding motorsport and automotive applications.

With a modular construction and programmable amplifier, this provides a fast delivery time for standard and custom configurations. 

Typical Applications Include: Barometric - Boost - Low Pressure - MAP 

Features: 

  • Barbed Hose Fitting
  • 1 to 5 Bar Range
  • Rugged Construction
  • Lightweight
  • Amplified Output
  • ±0.5% Accuracy
ASLF Barometric/MAP Pressure Transducer

The ASLF Series of High Performance Pressure Transducers have been designed for Barometric and MAP pressures in demanding motorsport and automotive applications. 

Offering a construction in lightweight aluminium, the ASLF differs from the ASLA by having a flange which installs directly onto the surface of inlet manifolds opposed to a typical threaded sensor. 

Typical Applications Include: Aerodynamics - Barometric - Boost - MAP

Features: 

  • Lightweight
  • Flange Mounting
  • 1 to 5 Bar Range 
  • Rugged Construction
  • Amplified Output
  • ±0.08% Accuracy
ASM Miniature High Temperature Pressure Transducer

The ASM Series of High Performance Pressure Transducers have been designed for High Temperature installations in motorsport and automotive applications; ideal for high precision data acquisition or control systems. 

Offering a high level of reliability and endurance the ASM is protected against the high vibration, shock and high temperatures found in motorsport. 

Continuous operation up to 150°C allows for installations in hot zones. 

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • High Temperature
  • Miniature Size
  • 50 to 400 Bar Range
  • Rugged Construction
  • Amplified Output
  • ±0.08% Accuracy
ASMC Miniature Pressure & Temperature Transducer

The ASMC Series of Miniature Pressure and Temperature Transducers offer a combined pressure and temperature sensor in a miniature all stainless steel package. 

Protected against the high vibration, shock and high temperatures found in motorsport, the ASMC provides high levels of reliability and endurance The temperature measurement is via a small protrusion on the end of the pressure port giving a fast and accurate temperature reading.

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • Built-In Temperature Sensor
  • Miniature Size
  • 150°C Operation 
  • 10 to 200 Bar Range
  • NTC or PTC Temperature Sensors
  • Amplified Output
  • ±0.2% Accuracy
ASMP Standard Metri-Pack Pressure Transducer

The ASMP Standard Series of High Performance Pressure Transducers have been designed for the detection of fluid and air pressures in demanding motorsport and automotive applciations; ideal for high precision data acquisition or control systems. 

With a modular construction and programmable amplifier, this provides a fast delivery time for standard and custom configurations.

The mating half connector can be supplied with the crimps upon request.

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • Metri-Pack (Packard) 3-Pin 150 Series Connector
  • 2 to 200 Bar Range
  • Compact Design
  • Rugged Construction
  • ±0.5% Accuracy
ASMPB Standard Metri-Pack Barbed Pressure Transducer

The ASMPB Standard Series of High Performance Pressure Transducers have been designed for the detection of fluid and air pressures in demanding motorsport and automotive applications; ideal for high precision data acquision or control systems. 

With a modular construction and programmable amplifier, this provides a fast delivery time for standard and customer configurations. 

The mating half connector can be supplied with the crimps upon request. 

Typical Applications Include: Barometric - Boost - Low Pressure - MAP 

Features: 

  • Barbed Hose Fitting
  • 1 to 5 Bar Range
  • Rugged Construction
  • Metri-Pack (Packard) 3-Pin 150 Series Connector
  • ±0.5% Accuracy
ASMT Miniature Pressure & Temperature Transducer

The ASMT Series of High Performance Pressure Transducers have been designed for High Temperature installations in automotive applications; ideal for high precision data acquisiton or control systems. 

Offering a high level of reliability and endurance the ASMT is protected against the high vibration, shock and high temperatures found in motorsport. 

Continuous operation up to 150°C allows for installation in hot zones. 

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water

Features: 

  • Built-In Temperature Sensor
  • 10 to 200 Bar Range
  • Miniature Size 
  • Amplified Output
  • 150°C Continuous Operation
  • ±0.2% Accuracy
ASUH Miniature Hybrid Pressure Transducer

The ASUH Series of High Performance Sub-Miniature Pressure Transducers have been designed for demanding installations in motorsport and automotive applications. 

With a new design for the ASUH, this utilises miniaturised hybrid components allowing savings in both size and weight; this transducer has enhanced performance at elevated temperature and is optimised for extreme installations such as on-engine or transmissions. 

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water

 

Features: 

  • Sub-Miniature Size
  • 10 to 400 Bar Range
  • Rugged Construction
  • 0-5000Hz Bandwidth
  • ±0.25% Accuracy
SP08 Wheel Speed Sensor
SP Wheel Speed Sensor

The SP Series of wheel speed and drive shaft sensors have been designed as a compact range of sensors to survive the harsh environments of wheel hubs and engine bays.

Typical applications include: Wheel Speed - Traction Control - Launch Control - Drive Shaft Speed

  • Miniature Size
  • M8 Thread Size
  • Ruggedised Contruction
  • NPN Output
  • 10-24V dc Supply
  • IP67 Sealed
RHL3 Laser Vehicle / Ride Height Sensor
RHL3 Laser Vehicle / Ride Height Sensor

The RHL3 Series of ride height laser sensors are designed to withstand the demanding environment with an anodized aluiminium case with a choice of electrical conections. The glass lens can be replaced easily in the event of damage.

Typical applications include: Ride Height - Wing Deflection - Chasis Distortion - Bodywork Deflection - Suspension Setup

  • Miniature Size
  • 200mm or 500mm Range
  • 0°C to +110°C Operating Temperature
  • Ruggedized Construction
  • Replaceable Lens
  • ±0.2% Linearity
KAA 1 and 2 Axis Accelerometers
KAA 1 and 2 Axis Accelerometers

The KAA Series of accelerometers offer a compact and robust solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems.  Supply can be either 5V or 8-16V and also specified as a single or dual axis accellerometer.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g Range
  • Ruggedized Construction
  • 1 or 2 axis
  • DC Response
  • Built-in Amplifier
  • Band Width 0-1500Hz
KP94B Linear Potentiometer Position Sensors
KP94B Linear Potentiometer Position Sensors

The KP94B Series of linear position sensors have a 9.4mm diameter aluminum body and a stainless steel shaft with rose jointed/bearingf/rod ends.  Designed to withstand the demanding environment using a proven conductive plastic track technology and multi fingered contacts the sensors offer high performance and reliability even under extreme temperature and vibration.  Can be specified with a standard IP65 sealing rating or upgrade to a full IP67 version.  Cable exit can be either forward or reverse.

Typical applications include: Damper Position - Throttle - Pedal - Aero Surface - Actuators

 

  • 12.5mm to 175mm in 8 Ranges
  • 9.4mm Diameter Housing
  • ±0.5% Linearity
  • IP65 or IP67
  • Bearing Mountings
  • Long Life
  • Compact Design
  • Note KP94P is the Pop-Joint Version
SP12 Wheel Speed Sensor
SP12 Wheel Speed Sensor

The SP Series of wheel speed and drive shaft sensorshave bben designed as a compact range of sensors to survive the harsh environments of wheel hubs anf engine bays.

Typical applications include: Wheel Speed - Traction Control - Launch Control - Drive Shaft Speed

  • Miniature Size
  • M12 Thread Size
  • Ruggedised Construction
  • NPN Output
  • 10-24V dc Supply
  • IP67 Sealed
KAP Differential Pressure Sensor

The KAP Series of cost effective High Performance Pressure Transducer have been designed for dynamic pressure measurements using a Pitot Tube in demanding motorsport and automotive applications.

Offering a high level of reliability and endurance the KAP is protected against the high vibration, shock and high temperatures found in motorsport. Also suitable for wet/wet installations. 

The KAP Series are race proven and can be found in many race series around the world. 

Please see our separate datasheet (KAPT) for details of the standard and customer Pitot Tubes that can be supplied. 

Typical Applications Include: Air Speed - Aerodynamics

Features: 

  • Miniature Size
  • 5V or 8-16V Supply
  • Rugged Design
  • Amplified Output
  • 25 to 75 mBar Range
KP94P Linear Potentiometer Position Sensors
KP94P Linear Potentiometer Position Sensors

The KP94P Series of linear position sensors have a 9.4mm diameter aluminium body and a stainless steel shaft with Pop-Joints each end.  Designed to withstand the demanding environment using a proven conductive plastic track technology and multi fingered contacts the sensors offer high performance and reliability even under extreme temperature and vibration.  Can be specified with a standard IP65 sealing rating or upgrade to a full IP67 version.  Cable exit can be either forward or reverse.

Typical applications include: Damper Position - Throttle - Pedal - Aero Surface - Actuators

  • 12.5mm to 175mm in 8 Ranges
  • 9.4mm Diameter Housing
  • ±0.5% Linearity
  • IP65 or IP67
  • Pop Joint Mountings
  • Long Life
  • Compact Design
  • Note the KP94B is the bearing version
NTC2 Metric Threaded Air Temperature Sensor / Sender
NTC2 Metric Threaded Air Temperature

The NTC2 series of air temperature sensors are designed to withstand the most demanding of environments.  They are available in a wide selection of materials with the innovative heat insulating PEEK ISOTIP™.  The high temperature non-metallic tip helps prevent heat soak from the surrounding material.  Sensing elements can be either PT1000 or a range of NTCs.  Note for a 1/8” NPT version please see our NPT2 product.  

 

Typical applications include: Air Intake - Cabin Temperature

 

  • Miniature Size
  • Mounting Threads: M6, M8, M10, M12 and 1/4"- 20 UNC (For 1/8" NPT see product NPT2)
  • Range -30°C to +150°C
  • Rugged Construction
  • Materials: Aluminum, Brass and Stainless Steel all with a PEEK™ ISOTIP™
  • PT1000 or NTC Thermistor
  • IP67
  • Custom Designs
KAPT Pitot Tube

The KAPT Pitot Tube is an in house design and is a manufactured product that is ideally partnered with the KAP Differential Pressure Sensor.

Individually or used together the KAPT and KAP offer a cost effective High Performance solution for Dynamic Pressure Measurements in demanding motorsport and automotive applications. 

Offering a high level of reliability and endurance, the KAPT is protected against the high vibration, shock and high temperatures found in motorsport; and is also suitable for wet/wet installations. 

Typical Applications Include:  Air Speed Aerodynamics

Features: 

  • Precision Engineered 
  • Bespoke Service
  • Rugged Design
  • Stainless Steel
  • Partners KAP
KP13S Linear Potentiometer Position Sensors
KP13S Linear Potentiometer Position Sensors

The KP13S Standard Series of linear position sensors have a 13mm diameter aluminium body and a stainless steel shaft.  Designed to withstand the demanding environment using a proven conductive plastic track technology and multi fingered contacts the sensors offer high performance and reliability even under extreme temperature and vibration.  Can be specified with a standard IP65 sealing rating or upgrade to a full IP67 version.  Cable exit can be either forward or reverse.

Typical applications include; Damper Position - Throttle - Pedal - Aero Surface - Actuators 

  • 25mm to 200mm in 8 Model Ranges
  • 13mm Diameter
  • ±0.5% Linearity
  • IP65 or IP67
  • Ruggedized Construction
  • Long Life
  • Standard/Longer Version of the KP13C
NPT2 1/8" NPT Air Temperature Sensor / Sender
NPT2 1/8" NPT Air Temperature Sensor / Sender

NPT2 1/8” NPT Air Temperature sensor is designed to withstand the most demanding of environments.  They are available in either a brass or stainless steel boby with an innovative heat insulating PEEK ISOTIP™.  The high temperature non-metallic tip helps prevent heat soak from the surrounding material.  Sensing elements can be either PT1000 or a range of NTCs.  Note for a metric or 1/4-20 UNC threaded versions please see our NTC2 product range.  

Typical applications include: Air Intake - Cabin Temperature

 
  • Miniature Size
  • Mounting Threads 1/8 NPT (For metric or 1/4-20 UNC threads see product NTC2)
  • Range -30°C to +150°C
  • Rugged Construction
  • Materials: Brass or Stainless Steel both with a PEEK™ ISOTIP™
  • PT1000 or NTC Thermistor
  • IP67
  • Custom Designs

 

KP13C Linear Potentiometer Position Sensors
KP13C Linear Potentiometer Position Sensors

The KP13C Compact Series of linear position sensors have a 13mm diameter aluminium body and a stainless steel shaft.  Designed to withstand the demanding environment using a proven conductive plastic track technology and multi fingered contacts the sensors offer high performance and reliability even under extreme temperature and vibration.  Can be specified with a standard IP65 sealing rating or upgrade to a full IP67 version.  Cable exit can be either forward or reverse.

Typical application include: Damper Position - Throttle - Pedal - Aero Surface - Actuators

  • 25mm to 175mm in 7 Model Ranges
  • 13mm
  • ±0.5% Linearity
  • IP65 or IP67
  • Ruggedized Construction
  • Long Life
  • Compact/Short Version of the KP13S
KTSM Turbo Speed Sensor
KTSM Turbo Speed Sensor

The KTSM Series of turbo speed /temperature sensors are designed for direct installation into the turbo casing.   Development of the system has taken into account the environment inside the engine compartment and various design features have been incorporated to keep the signal clean and rugged.

Sensing is by the eddy current principle to detect the blades (Titanium or aluminium) as they pass by. 

Typical applications include: Turbo speed - High Speed Shaft. 

  • Max Speed 400,000 RPM
  • Outputs: TTL or  Pulse/blade - Pluse/ Revolution 0-5V Analogue
  • Also Measures Temperature 0-5V Analogue
  • Number of Blades 1 to 16
  • Internal Test Signal to Aid Setup
  • Module Satus LED
  • Sensor M5 x 0.5 or 0.8mm
NTC1 Metric Threaded Fluid Temperature Sensor / Sender
NTC1 Metric Threaded Fluid Temperature Sensor / Sender

The NTC1 Series of fluid temperature sensors are designed to withstand the most demanding of environments.  They are available in a wide selection of materials, sensing elements ( PT1000 or NTC) and a range of metric threads (See separately the NPT1 for a 1/8" NPT threaded version).

Typical applications include: Oil - Fuel - Brake Fluid - Coolant - Water

  • Miniature Size
  • Mounting Threads: M6, M8, M10, M12 (1/8" NPT  - see product NPT1)
  • Range -30°C to +150°C
  • Ruggedized Construction
  • Materials: Aluminium, Brass and Stainless Steel
  • PT1000 or NTC Thermistor
  • IP67
  • Custom Designs
KP15S Linear Potentiometer Position Sensors
KP15S Linear Potentiometer Position Sensors

The KP15S Standard Series of linear position sensors have a 15mm diameter aluminium body and a stainless steel shaft.  Designed to withstand the demanding environment using a proven conductive plastic track technology and multi fingered contacts the sensors offer high performance and reliability even under extreme temperature and vibration.  Can be specified with a standard IP65 sealing rating or upgrade to a full IP67 version.  Cable exit can be either forward or reverse.

Typical application include: Damper Position - Throttle - Pedal - Aero Surface - Actuators

  • 25mm to 250mm in 7 Model Ranges
  • 15mm Diameter
  • ±0.5% Linearity
  • IP65 or IP67
  • Ruggedized Construction
  • Long Life
  • Standard/Longer Version of the KP15C
NPT1 1/8" NPT Fluid Temperature Sensor / Sender
NPT1 1/8" NPT Fluid Temperature Sensor / Sender

The NPT1 fluid temperature sensor is designed to withstand the most demanding of environments. With a choice of materials and two types of sensing elements, PT1000 or NTC thermistor.  Supplied with either the standard metal tip or the ISOTIP™ isolated tip using PEEK (high temperature plastic) material to eliminate heat soak from the surrounding metal work. The NPT1 is only available with a 1/8” NPT thread, for metric threads please see the NTC.

Typical application include: Oil - Fuel - Brake Fluid - Coolant - Water

  • Miniature Size
  • 1/8" NPT Thread (For metric threads see product NTC1)
  • Range -30°C to +150°C
  • Ruggedised Construction
  • Materials:  Brass, Brass with ISOTIP PEEK  and Stainless Steel 
  • PT1000 or NTC Thermistor
  • IP67
  • Custom Designs
KAT Low Bandwidth (Chassis) Accelerometer
KAT Low Bandwidth (Chassis) Accelerometer

The KAT Series of low bandwidth accelerometers offer a compact and robust solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems.  The low bandwidth sensor eliminates high frequency chassis vibrations, therefore allowing low frequency events to be detected and measured.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±10g Range
  • 0 to 20 HZ Bandwidth
  • Ruggedized Construction
  • 3 Axis of Measurement
  • ±20000 Over Range
KP19S Linear Potentiometer Position Sensors
KP19S Linear Potentiometer Position Sensors

The KP19S Standard Series of linear position sensors have a 19mm diameter aluminium body and a stainless steel shaft.  Designed to withstand the demanding environment using a proven conductive plastic track technology and multi fingered contacts the sensors offer high performance and reliability even under extreme temperature and vibration.  Can be specified with a standard IP65 sealing rating or upgrade to a full IP67 version.  Cable exit can be either forward or reverse.

Typical application include: Damper Position - Throttle - Pedal - Aero Surface - Actuators

  • 25mm to 300mm in 8 Model Ranges
  • 19mm Diameter
  • ±0.5% Linearity
  • IP65 or IP67
  • Ruggedized Construction
  • Long Life
  • Note There is no Compact Version of the KP19S
KP Series - Linear Position Sensor Accessories
KP Series Linear Position Accessories

The KP Series of Linear Position Sensors has various accessory options available to customise your position sensor to suit a particular environment. All the accessories are built to withstand the harsh environment of motorsport and vehicle testing applications. 

  • Ball Tip, Rod End or Pop Joint
  • Flange
  • Carbon Sleeve
  • IP67 Rated Seal
  • Cable Exit
  • Spring Return
  • Cable Assemblies
  • Connectors
KIR3 Infra-red Tyre and Brake Sensor
KIR3 Infra-red Tyre and Brake Sensor

The KIR3 Series of miniature infra-red temperature sensors offers noncontact measurement of tyres, carbon & steel brake rotors, clutch and engine temperatures.  The KIR3 can be setup ready to use or we can supply user friendly software and programming lead for a customer to setup or re-range the sensor for a different application.

Typical applications include: Brakes - Tires - Clutch - Air Intake - Cabin Temperature

  • Fully Programmable
  • Miniature Size
  • Range -20°C to 1000°C
  • Ruggedized Construction 15:1 Optics
  • User Configurable
  • 0-5V Output
KWP Pull / Extending Wire Potentiometer
KWP Pull / Extending Wire Potentiometer

The KWP Series of wire potentiometers are designed to withstand the demanding motorsport  and automotive environment.   These linear sensors use a retractable stainless steel wire and offer high linearity and reliability.

Typical applications include: Pedal Movement - Steering Angle - Suspension travel

  • Miniature Size
  • 50mm to 1250mm in 7 Ranges
  • ±0.5% Linearity 
  • Long Life
  • Compact Design
KIR4 Infra-red Tyre Temperature Sensor
KIR4 Infra-red Tyre Temperature Sensor

The KIR4 Series of Infra-red sensors offers a compact, robust and reliable soloution for non-contact temperature measurement and is mainly used to monitor tyre performance.

Typical applications include: Tyres - Air Intake - Cabin Temperature

  • Miniature Size
  • Range 0°C to 200°C
  • Ruggedized Construction
  • Linear Output
  • High Accruacy
  • 0.5 to 4.5V Linear Output
KIR16X4 CAN Bus Tyre Temperature Sensor
KIR16X4 CAN Bus Tyre Temperature Sensor

The KIR16X4 infra-red tyre temperature sensor provides race engineers with a matrix of 16 x 4 independent temperature points across a tyre.

It’s a very small lightweight sensor that has a CAN bus 1Mb output for direct connection to most modern data loggers.

User selectable modes offer a range of functions including CAN ID, bandwidth and distance to target.  The modes can be selected either over CAN bus or via an Android Configuration App.  A Technical Manual is available on request.

Typical applications include: Tyre Temperature Monitoring - Component Profile

  • 64 individual measurement points (16 x 4)
  • CAN Bus Output
  • 0 to 200°C Range
  • 40 or 60° Options
  • Miniature Size
  • User Configurable
  • 5 to 18 V Supply

 

KTC Exhaust Temperature Sensor Thermocouple
KTC Exhaust Temperature Sensor Thermocouple

The KTC Series of thermocouples use high temperature 310 grade stainless steel or inconel to survive the harsh environment of a race car exhaust system.

Typical applications include: Exhaust Gas - Coolant - Oil - Air - Surface Temperature - Thermal Profiles

  • MI Flexible Stainless Steel
  • 1mm to 6mm Diameter
  • Type 'K' Isolated Junction
  • Single or Duplex Sensor
ASH Low Range High Endurance Pressure Transducer

The ASH Series of High Performance Pressure Transducers have been designed for extreme endurance and high temperature installations on motorsport and automotive applications; ideal for high precision data acquisition or control systems. The transducers can be installed directly onto vehicles or as part of a test stand or dyno.

The transducers offer a high level of reliability and endurance, they are protected against the high vibration, shock and high temperatures found in motorsport. Continuous operation up to 150°C allows for installation in hot zones.

Typical Applications Include: Air - Brakes - Boost - Coolant - Fuel - Oil - Water 

Features:

  • High Fatigue Life
  • High Accuracy
  • 1 to 10 Bar Range
  • Rugged Construction
  • Amplified Output
  • ±0.08% Accuracy
ASLT Standard Pressure & Temperature Transducer

The ASLT Series of Standard Pressure and Temperature Sensors have been designed for use in demanding motorsport and automotive testing industries; ideal for high precision data acquisition or control systems. 

Offering a high level of reliability and edurance the ASLT is protected against the high vibration, shock and high temperatures found in motorsport. 

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water 

Features: 

  • Built-In Temperature Sensor 
  • Rugged Construction 
  • 1 to 400 Bar Range
  • Amplified Output
  • ±0.5% Accuracy
ASM Miniature Low Range High Temperature Pressure Transducer

The ASM Series of High Performance Pressure Transducers have been designed for High Temperature installations in motorsport and automotive applications; ideal for high precision data acquisition or control systems. 

Offering a high level of reliability and endurance the ASM is protected against the high vibration, shock and high temperatures found in motorsport. 

Continuous operation up to 150°C allows for installations in hot zones. 

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water

Features: 

  • High Temperature
  • Miniature Size
  • 2 to 35 Bar Range 
  • Rugged Construction
  • Amplified Output
  • ±0.08% Accuracy
ASUH-I Hybrid Pressure Transducer

The ASUH-I Series of High Performance Sub-Miniature Pressure Transducers have been designed for demanding installations in precision engineering. 

With a new design for the ASUH-I, this utilises miniaturised hybrid components allowing savings in both size and weight; this transducer has enhanced performance at elevated temperature and is optimised for extreme installations such as on-engine or transmissions. 

Typical Applications Include: Brakes - Boost - Coolant - Fuel - Oil - Water

Features:

  • Sub-Miniature Size
  • 4-20mA Output
  • 10 to 400 Bar Range
  • Rugged Construction
  • 0-1000Hz Bandwidth
  • ±0.25% Accuracy
CAN8 Signal Acquisition Module

The CAN8 Signal Acquisition Module integrates a high quality multi-channel Data Acquisition system, high performance Micro-Controller (MCU) and CAN Interface to provide access to external analogue sensors via a Controller Area Network (CAN). 

Features: 

  • Compact Design
  • 16-Bit Resolution
  • 8 Analogue Channels
  • PT1000 Input
  • Speed Signals Inputs
  • 5V Sensor Supply
DSTS Dynamic Drive Shaft Torque Sensor

KA Sensors offers a fully custom service to fit a wireless Dynamic Torque Measuring Sensor to a drive shaft. 

Available to both race teams nd race car manufacturers the sensor can be designed, manufactured, calibrated and supplied to fit to a wide range of Drive Shaft Diameters. 

Every sensor is tested and issued with a traceable calibration certification before shipping. 

Typical Applications Include: Input Shafts - Half Shafts - Steering

Features: 

  • Wireless Output
  • Internal 3.6V Battery
  • Various Shaft Sizes
  • Full Custom Design
  • 0 to ±1000Nm
GSS Gear Shift Load Cell

The GSS Series of Miniature Load Cells are designed for the detection and measurement of tension and compression forces in Gear Shift Application. 

During the gear change sequence, the driver moves the gear lever as normal, the GSS Series Load Cell detects the force applied to the gear shift lever. This force is measured by the ECU, then a series of control events take place that allows the gears to mesh with full throttle still applied. 

Typical Applications Include: Aero Struts - Gear Shift - General Testing - Pedal Force - Steering - Suspension 

Features: 

  • Miniature Size
  • 5V or 8-16V Supply
  • ±250 & ±2000N
  • IP67 Sealed 
  • ±1% Accuracy
  • Rugged Construction
GST Gear Lever Load Cell

The GST Series of Gear Lever Load Cells are designed or the detection and measurement of tension and compression forces in Gear Shift Application. 

Installed directly on top of the gear lever, the GST Series Load Cell is fitted with an aluminium or nylon knob. Detection of the direct drivers input force is made when selecting gears. The Load Cell has a pre-amplified signal which is compatible with most ECU's, therefore ensuring  simple and reliable clutchless gear change strategy can be performed. 

Typical Applications Include: Gear Shift - General Testing - Steering 

Features: 

  • Sequential or 'H' Pattern Gearbox
  • Built-In Amplifier 
  • 5V or 8-16V Supply
  • ±150 & ±1000N
  • Rugged Construcion
  • ±0.5% Accuracy
KAA3 Triaxial / 3 Axis Accelerometer
KAA3 Triaxial / 3 Axis Accelerometer

The KAA3 Series of triaxial (3 axis) accelerometers offer a compact and robust solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems. Supply of 5V or 8-16V.  With a bandwidth of zero to 1500Hz these sensors are useful for applications within component and full vehicle testing and development programs.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g Range
  • Rugged Construction
  • 3 Axes of Measurement
  • DC Response
  • Built-in Amplifier
KAAT triaxial / 3 Axis Accelerometer
KAAT triaxial / 3 Axis Accelerometer

The KAAT Series of triaxial (3 axis) accelerometers offer a compact and robust solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g Range
  • Rugged Construction
  • 3 Axes of Measurement
  • DC Response
  • Built-in Amplifier
KAE single / 1 Axis Accelerometer
KAE single / 1 Axis Accelerometer

The KAE Series of miniature accelerometers offer a compact and robust solution for the motor sports and automotive testing industries.  The sensors offer 1 axis of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g
  • Single Axis
  • DC Response
  • Rugged Design
  • Built-in Amplifier
KAH Hub Accelerometer
KAH Hub Accelerometer

The KAH Series of accelerometers offer a compact and robust solution for the motorsport and automotive testing industries with integral signal conditioning to give a standard signal of 0.5V to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Braking - Suspension Test - Aero Performance - Structural Analysis - Launch Control

  • Miniature Size
  • ±2g to ±200g Range
  • Ruggedized Construction
  • 1 Axis of Measurement
  • DC Response
  • Built-in Amplifier
KATD 1 and 2 Axis (Dual) Low Bandwidth Accelerometer
KATD 1 and 2 Axis (Dual) Low Bandwidth Accelerometer

The KATD Series of single or dual axis accelerometers are designed for true inertial measurements on race vehicles or automotive test vehicles. The use of low bandwidth sensing elements ensures that high frequency vibration from trans-mission components or similar do not affect the measurements. Therefore allowing only lower frequency components to be detected and measured. The sensors offer 2 axes of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V which is ideal for most data acquisition systems.

Typical applications include: Aero Performance - Launch Control - Track Mapping - Lean Angle – Cornering – Braking

  • Miniature Size
  • ±2g to ±10g
  • 2 Axis Output
  • 0 to 20Hz Bandwidth
  • ±20,000g Over Range
  • Built-in Amplifier 
KBP Brake Pedal Load Cell

The KBP Series of miniature low profile Load Cells are designed for the detection and measurement of compression forces on brake and other pedal applicaitons. 

Usually used for vehicle development measurements, the KBP can be used as a feedback device within control systems. 

Typical Applications Include: Brake Force - General Testing - Pedal Force 

Features: 

  • Miniature Size 
  • 5V or 8-16V Supply
  • Integrated Amplifier 
  • Low Profile
  • ±500 to ±2000N 
  • Rugged Construction
KG Series of angular rate sensors - Gyros
KG Series of angular rate sensors - Gyros

The KG Series of angular rate sensor offers a compact and robust solution for the motor sports and automotive testing industries.  The sensors offer 1, 2 or 3 axis of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V which is ideal for most data acquisition systems. Supply voltage can be 5V or 8-16V and low current consumption of less than 25mA.  With a bandwidth of zero to 1500Hz these sensors are useful for applications within component and full vehicle testing and development programs.

Typical applications include: Aero Performance - Structural Analysis - Suspension Test - Launch  - Control – Braking

  • Miniature Size
  • ±80° /S or ±200/S
  • <±1.0% FS Linearity
  • 1, 2 or 3 Axis
  • DC Response
  • Built-in Amplifier
KH21 & KH22 Non-Contact Rotary Position Sensor
KH21 & KH22 Non-Contact Rotary Position Sensor

KA Sensors KH21 series of non-contact rotary position sensors are designed to withstand the harsh environments of motorsport applications and automotive testing applications.

Using proven ˜Hall Effect" technology, the sensors offer high performance and reliability at temperatures up to +150°C. Alternatively, it is capable of operational excellence in cold environments down to -25°C.  

Available in either single (3 wire) or dual (6 wire) outputs. The modular design allows for various mounting arrangements for the sensor and also importantly the different shaft/drive types.

 

Typical applications include: Throttle Position - Steering Angle - Pedal Position - Gear Position - Aero Surfaces - Actuators

  • Compact Design
  • Excellent Linearity
  • High Temperature
  • Lightweight
  • IP65 or IP67 Sealing
  • Rugged Construction
KH31 & KH32 Female Rotary Position Sensor

Typical applications include: Throttle Position - Steering Angle - Pedal Position - Gear Position - Aero Surfaces - Actuators 

  • Compact Design
  • Excellent Linearity 
  • High Temperature 
  • Lightweight 
  • IP65 or IP67 Sealing 
  • Rugged Construction 
  •  
KH31 & KH32 Female Rotary Position Sensor

Typical applications include: Throttle Position - Steering Angle - Pedal Position - Gear Position - Aero Surfaces - Actuators 

  • Compact Design
  • Excellent Linearity 
  • High Temperature 
  • Lightweight 
  • IP65 or IP67 Sealing 
  • Rugged Construction 
KMS Series Oil Contamination Sensor
KMS oil contamination sensor

The KMS series of miniature condition monitoring sensors are designed to detect the presence of ferrous material in oil systems.

In particular the sensor can be used to monitor gearbox and transmission oil for signs of change or wear in the gear box or differential.

Simple installation with an integrated temperature sensor which also assists with engine condition monitoring.

  • miniature size
  • integral temperature sensor
  • 5V  or 8-16V supply
  • 0.5V to 4.5V output
  • 0 - 150°  C range
KR22 Rotary Position Sensor
KR22 Rotary Potentiometer

The KR22 series of rotary potentiometers are designed to withstand the harsh environments of motorsport applications and automotive testing applications.

Using proven ‘conductive plastic’ technology, the sensors offer high performance and reliability at temperatures up to +175°C.

With a small and lightweight 22.5mm diameter body these are ideal for many applications within both motorsport and automotive testing and development programs.

Available in either single (3 wire) or dual (6 wire) outputs.  The modular design allows for various mounting arrangements for the sensor and also importantly the different shaft/drive types.

Typical applications include:· Throttle Position - Steering Angle - Pedal Position - Gear Position - Aero Sufaces

 

 
  • Compact Design
  • Excellent Linearity
  • High Temperature
  • Lightweight
  • IP66 or IP67 Sealing
  • Rugged Construction
NTC2F- Fast Response Series Air and Gas Temperature Sensor

The NTC2F-Fast Response Series of high performance temperature sensors are designed to measure the temperatures of air and gas inlet on demanding motorsport and automotive testing applications. The sensing element is a sub miniature 10kΩ NTC thermistor, with a very fast response time which helps to improve engine performance.

Typical applications include: Air intake - Turbo Temperature

  • Response Time:<2 seoonds in moving air
  • With PEEK ISOTIP
  • -20°F to +400°F
  • NTC Thermistor
  • IP67 Sealed
Rear Wheel Torque Transducer 1
Rear wheel Torque Transducer

For the first time a cost-effective and accurate rear wheel power and torque measurement device is now available. Designed to be a self-contained sensor unit, the rear wheel torque transducer is a direct replacement for your existing rear wheel sprocket carrier. The innovative design allows torque to be measured at the rear wheel, enabling race teams to increase their knowledge, and cost-effectively develop their motorcycles, in a way that was not possible before.

  • Compact Design
  • Lightweight
  • 0.5V to 4.5V Output
  • Speeds up to 230 mph
  • +/-1400Nm
RHL4 Miniature Laser Ride Height Sensor

The RHL4 Series of Miniature laser ride height sensors are designed to withstand the harsh environments of industrial or motorsport applications. the sensor has a small diameter visible laser which is reflected off the track surface to a precision CCd detector which determines the height from the ground.

Typical applications include: Ride height - Chassis Distortion - Bodywork Deflection - Suspension Setup

  • 8 inch Range
  • 32 to 185ºF Temperature Range
  • 4KHz Measurement Rate
  • Replaceable Lens
  • +/- 0.1% Linearity
SGF Strain Gauge - Force

KA Sensors offers a bespoke service and very precise application and calibration of Strain Gauges to key components.

The Strain Gauge Service to both race teams and race car manufacturers. 

Typical Applications Include: Push / Pull Rods - Rod Ends - Suspension - Wing Supports - Wishbones 

 

Features: 

  • ±10 to ±30KN 
  • ±1000 to ±3000KG
  • Amplified Output
  • 5V or 8-16V Supply
  • Full Custom Service
SGT Strain Gauge - Torque
Strain Gauge - Torque

Typically this is a strain gauge applied and calibrated on a steering column or drive shaft.  This is a bespoke service – see separate service for the strain gauging of push rods or items where an longitudinal (not twisting) force is applied.

Typical applications include: Drive and Prop Shafts - Steering Columns

  • ±25to ±100 Nm
  • ±20lbft to ±75lbft
  • Amplified Output
  • 5V or 8-16V Supply
  • Full Custom Service
SPC Dual Flange Speed Sensor

Typical applications include: Speed - Crank Speed / Position - Wheel Speed - Drive Shaft Speed - Traction Control - Launch Control 

  • Miniature Size
  • Flange Mounting 
  • NPN Output
  • 5-24V Supply 
  • IP67 Sealed
  • Rugged Design
SPC Speed Sensor

Typical applications include: Speed - Crank Speed / Position - Wheel Speed - Drive Shaft Speed - Traction Control - Launch Control

  • Miniature Size
  • Flange Mounting
  • NPN Output
  • 5-24V Supply
  • IP67 Sealed 
  • Rugged Design
SPI Series Speed Sensor

The SPI Series Sensors have been designed as simple compact speed sensors for demanding installations in motorsport and on-vehicle automotive applications.

Typical applications include: Speed - Crank Speed/Position - Wheel Speed - Drive Shaft Speed - Traction Control - Launch Control

  • Miniature Size
  • Flange Mounting
  • NPN Output
  • IP67 Sealed
  • 5-24V Supply
SPI Speed Sensor

Typical applications include: Speed - Crank Speed / Position - Wheel Speed - Drive Shaft Speed - Traction Control - Launch Control 

  • Miniature Size
  • Flange Mounting 
  • NPN Output 
  • 5-24V Supply 
  • IP67 Sealed 
  • Rugged Design